2019 Tohatsu MD25B2JETEPTOL

$9,363.00


Availability
Brochure
Year
2019
Manufacturer
Tohatsu
Model
MD25B2JETEPTOL

Overview

Description

Navigate through shallow waters with Tohatsu's 25hp Jet Drive TLDI®. This outboard has been designed to allow you to open up a new world of hunting and fishing spots. With a jet-drive, you can explore waters that are difficult to reach with a propeller-driven outboard.



Equipped with a factory-installed jet drive, this new engine uses the power of our 40hp TLDI® and is also backed by a 5 year limited warranty. Make this rugged new outboard your partner on the water today and find your new favorite fishing spot tomorrow!

Tohatsu 25 hp JET TLDI® Benefits
  • Air assisted direct fuel injection system that provides excellent fuel economy
  • Excellent horsepower-to-weight ratio
  • Extremely quiet operation
  • Lightweight and compact
  • Ultra-low emission, EPA and CARB approved
  • 5 Year limited warranty
High Performance and Easy Operation
  • Inductive ignition system for reliable starting
  • Oil reservoir located on the top of the motor for quicker and easier refill onboard
  • Multi-point oil injection system to more completely lubricate vital engine components
  • Remote control box** (**Remote control models)
Fundamentals for User Convenience and Reliability
  • Thermostatically controlled cooling system for consistent engine temperature
  • High grade marine aluminum alloy that provides the ultimate protection against corrosion
  • Zinc coating on internal water passages for superior corrosion resistance
  • User adjustable idle and trolling speeds
  • Tachometer** (**Remote control models)
Warning and Protection
  • Low oil level warning (visual and audible)
  • Overheat warning (visual and audible)
  • Battery voltage warning (visual only)
  • Start-in-gear protection for safer engine starting
  • Over-rev. limiter
  • Safety lanyard (an essential protection feature standard on all Tohatsu outboards)
Features
  • Engine Control Unit (ECU): The 32 bit engine control unit controls the fuel injection and ignition timing for TLDI® outboards.
  • Air Compressor: One of TLDI®'s essential engine components that is the driving force in achieving stabilized fuel injection.
  • Direct fuel Injection into Cylinders: Due to the intrinsic design of the chamber on the cylinder head, the finely atomized fuel mist created by the fuel injector is injected near the spark plug to achieve ideal combustion.
  • Multifunctional Tachometer: The tachometer informs the operator of potential problems through the meter indicator and warning lamp. (Remote models only.)
  • 3-Step Trolling Speed Control: The idling speed can be set to any of the three rpm ranges, 700, 800 or 900, by adjusting it on your key switch. This feature allows you to select the ideal trolling speed for maneuvering during a variety of current and wind conditions.
Model Specific Features
  • Model: MD25B2JETEPTOL
  • Shaft Length: 20
  • Cylinders: 3
  • Electric Start: Standard
  • Remote Control: Standard
  • 12V Charging System: Standard
  • Power Trim & Tilt: Standard
  • Oil injection: Standard
  • Tachometer: Standard
Specifications
  • Engine (No. of Cylinder): 3
  • Output: Jet Pump 25 hp (18.4 kW); Horsepower 40 hp (29.5 kW)
  • Displacement: 697 cc (42.5 cu.in.)
  • Bore x Stroke: 68 x 64 mm (2.68 x 2.52 in)
  • Starting: Electric
  • Control Type: Remote Control or Tiller Handle
  • Gear Ratio: 1:1
  • Gear Shift: Forward - Neutral - Reverse
  • Transom Height: 20 in.
  • Fuel: Unleaded Gasoline (87 Octane)
  • Oil Type: Premium TCW-3 or Recommended
  • Fuel Tank: Optional
  • Weight*: 196.2 lb. (89 kg)
  • Alternator Output: 12V, 280W, 23A
  • Max. RPM Range: 5,150 - 5,850
  • Direct Fuel Injection: Standard
  • Inductive Ignition System: Standard
  • Start In Gear Protection: Standard
  • Thermostat Controlled Cooling System: Standard
  • Through-Jet Exhaust: Standard
  • Power Trim and Tilt: Standard
  • Variable Idle Speed: 700, 800, 900 rpm
NOTES:
* Weight specification is based on the lightest version. Specifications and descriptions are subject to change without notice.

Specs

Engine

Engine Type
3 Cylinder
Bore x Stroke
2.68 x 2.52 in. (68 x 64 mm)
Displacement
697 cc (42.5 cu.in.)
Starting
Electric Start

Dimensions

Shaft Length
20 in.
Weight
196.2 lb. (89 kg)

General

Trim Method
Power Trim and Tilt
Propshaft Horsepower
Jet Pump 25 hp (18.4 kW); Horsepower 40 hp (29.5 kW)
Full Throttle Operating Range
5,150 - 5,850 rpm
Gear Ratio / Shift
1:1 / F-N-R
Alternator
12V, 280W, 23A
Steering
Remote Control

Related Products